This is a top quality German made CE certified electronic ballast used to power 150W metal halide lamps. It is lightweight, slimline and includes a 5 year manufacturer's warranty.
The unit can be used as a remote ballast and includes a cord grip and push-in terminals. It can also be built-in and secured using the mounting holes to an enclosure.
|
Casing: | Heat-resistant polycarbonate |
| Casing temperature tc: | max. 70?C |
| Ignition voltage: | 4,0 - 5,0 kV |
| DC operation: | 198-254V |
| Permissible load capacity: | 20-100pF |
| Total harmonic distortion: | <10% |
| Power factor: | 0.98 |
| |
| Constant power consumption |
| Idling firm |
| Luminaires with protection class I+II. |
| |
| Lamp type: | HI |
| Output [W]: | 150 |
| Lamp number: | 1 |
| Dimming: | Not dimmable, without ignitiontime bridging |
| Main voltage AC [V]: | 220 |
| Frequency [Hz]: | 50 |
| Kind of connection: | Push-in terminal |
| Protection class: | Class of protection I |
| Width B [mm]: | 89 |
| Height [mm]: | 37 |
| Length [mm]: | 224 |
| Fixing centre [mm]: | 174 |
| Max. ambient temperature [?C]: | 40 |
| |
| No flickering of defective lamps. |
| Temperature control with autom. reset. |
| Longer lamp life (appr.50%). Up to 25% energy savings. |
| Fixing bracket for screw |
| M4 for base mounting. |
| With cord grip, independent ballast. |
| |
| CE tested and certified |
| EN 61000-3-2 (Mains harmonics) |
| EN 55015 (RFI-suppression) |
| EN 61547 (EMC immunity to interference) |
